Thermador spans induction, steam, and column refrigeration, so a service call can mean anything from a Star burner igniter to a Freedom column control board. The brand shares a GE-derived fault language on several cooking lines, which makes the code a real starting point. This guide covers what those faults mean on Thermador and which parts they usually lead to.
Models We Service
We service the full current and recent Thermador lineup, including the Pro Grand and Pro Harmony ranges (PRG and PRD series), the Freedom and Masterpiece induction cooktops (CIT series), the wall ovens (POD and PODS series), and the Sapphire dishwashers. Pre-Freedom column refrigeration and older Professional ranges are common here, and while some control boards now take an order, the mechanical parts are readily supplied.
How Thermador Repair Works
Thermador is part of the BSH group and its ovens and ranges surface faults as F-codes on the display. Reading the exact code narrows the cause quickly, though some point to the same handful of parts.
These are the Thermador codes we meet most, paired with their meaning and the work involved:
| Code | Usual Meaning | What It Takes to Clear It |
|---|---|---|
| F1 | Control board or user-interface fault | Reset power; replace the control board if it repeats |
| F2 | Oven over-temperature, often a stuck relay | Replace the relay board and check the sensor |
| F3 | Oven temperature sensor open or shorted | Replace the oven sensor and inspect the harness |
| F7 | Stuck or shorted keypad/touch control | Replace the touch panel or membrane |
| F34 | Door latch or lock fault | Replace the latch assembly and check the thermal fuse |
Common Problems We Fix
Across Thermador cooking and refrigeration, these are the faults that repeat:
- F-code faults tied to the oven control board.
- Oven sensors that open and trip an F3.
- Door latch failures that block heating.
- Induction touch controls that stop responding.
- Igniters and spark modules on the gas ranges.
- Relay boards after an over-temperature event.
Maintenance and When to Call
Clean the Star burner caps and keep column condensers free of dust, which accumulates quickly in dry Front Range air. Call when a fault code repeats after a reset, when a column will not hold its setpoint, or when induction elements drop out. We read the code, confirm it at the harness, and confirm diagnostic and travel fee terms before repair approval to your repair.
Need This Repaired in the Colorado Springs Area?
Book online or call during our hours. genuine OEM parts and a written estimate. Diagnostic and travel fees, if applicable, are confirmed before the appointment and before repair approval.
Schedule Service Call Today